Contact and interconnect formation on compound semiconductor devices by ionized-cluster beam deposition

A new deposition technology, namely the ionized-cluster beam deposition method, was applied to form contacts and interconnects on III–V compound semiconductor devices. Au alloy films deposited by this technology had strong enough adhesion to an insulator layer to be a satisfactory interconnection. A step approximately 8 μm high at an angle of 90° to the semiconductor was covered fully with an Au alloy film obtained by this method. Electrical ohmic contacts for p-type GaP and GaAs were successfully obtained at substrate temperatures of 400 °C and 300 °C respectively without any further annealing process; this resulted in better device characteristics because of the lower process temperatures and also made the device less expensive because of a reduction in fabrication time.     

Large graded-index preforms fabricated by high-rate VAD

A large preform for 220 km of fibre was fabricated with the vapour-phase axial deposition (VAD) method. The deposition rate for the core was 1.7 g/min. Optical fibre drawn from a part of the preform had optical attenuation of 0.58 dB/km and bandwidth 500 MHz km0.9 at a wavelength of 1.3 ?m.     

Design principle of micromechanical probe with an electrostatic actuator for friction force microscopy

It is important to understand friction force in micro/nano mechanical devices both at high sliding speed and with high lateral resolution. Dual-axis friction force microscopes that can provide high lateral resolution and accuracy have been proposed; however, the sliding speed is limited by the probe scan speed. While a micro mechanical probe (MMP) with an electrostatic actuator can overcome this problem, details of probe design have not been established yet. This paper presents the principle of the mechanical design for an MMP with high force sensitivity and sufficient drive force. The dimensions of the double cantilever beam control the spring constants, resonant frequencies, and drive force. The use of an actuated MMP enables accurate friction force microscopy at high sliding speeds, which is required for the design of micro/nano mechanical devices.     

Transient stability considering dynamic load in bulk power system with high DG penetration

Transient stability may be seriously affected when a large number of distributed generators (DG) stop simultaneously during voltage sag. It is necessary to analyze accurately the dynamics of bulk power systems with high DG penetration. In this paper, transient stability is studied by analyzing power‐angle curves of generators while considering load dynamics and model order reduction at lower voltages. Based on the analysis, a decrease in the load internal resistance after voltage sag causes transient instability of generators. The phenomenon is confirmed through simulation using a one‐machine and one‐load model. This paper also suggests that the simulation results might be misled by traditional bulk power system modeling such as using the static load model and ignoring impedance at lower voltages. As for the numerical simulation, a large level of DG stoppage leads to transient step out in a bulk power system, and the stability is greatly improved by DG voltage regulation. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(2): 20– 29, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20608     

Formation of the spore clumps during heat treatment increases the heat resistance of bacterial spores

Effects of the clumping of bacterial spores on their heat resistance as a result of heat treatment were investigated. Spore suspensions of Bacillus cereus, Bacillus coagulans and Bacillus licheniformis were heated at 85 degrees C. Survivor curves of the three strains showed tailing in all treatments after 30 min. As the treatment time increased, the formation of spore clumps increased in all strains after 20 min. Relative hydrophobicity of the spore surface increased as a result of heat treatment. The effect of spore concentration on the inactivation of the B. licheniformis spores was investigated, and surviving curves showed no tailing below a concentration of 4.9 log CFU/ml.     

Antioxidant Effects of Herbal Tea Leaves from Yacon (Smallanthus sonchifolius) on Multiple Free Radical and Reducing Power Assays,Especially on Different Superoxide Anion Radical Generation Systems

Yacon (Smallanthus sonchifolius), a native Andean plant, has been cultivated as a crop and locally used as a traditional folk medicine for the people suffering from diabetes and digestive/renal disorders. However, the medicinal properties of this plant and its processed foods have not been completely established. This study investigates the potent antioxidative effects of herbal tea leaves from yacon in different free radical models and a ferric reducing model. A hot‐water extract exhibited the highest yield of total polyphenol and scavenging effect on 1,1‐diphenyl‐2‐picryl hydrazyl (DPPH) radical among four extracts prepared with hot water, methanol, ethanol, and ethylacetate. In addition, a higher reducing power of the hot‐water extract was similarly demonstrated among these extracts. Varying concentrations of the hot‐water extract resulted in different scavenging activities in four synthetic free radical models: DPPH radical (EC₅₀ 28.1 μg/mL), 2,2′‐azinobis(3‐ethylbenzothiazoline‐6‐sulfonic acid) cation radical (EC₅₀ 23.7 μg/mL), galvinoxyl radical (EC₅₀ 3.06 μg/mL), and chlorpromazine cation radical (EC₅₀ 475 μg/mL). The yacon tea‐leaf extract further demonstrated superoxide anion (O₂^?) radical scavenging effects in the phenazine methosulfate‐NADH‐nitroblue tetrazolium (EC₅₀ 64.5 μg/mL) and xanthine oxidase assay systems (EC₅₀ 20.7 μg/mL). Subsequently, incubating human neutrophilic cells in the presence of the tea‐leaf extract could suppress the cellular O₂^? radical generation (IC₅₀ 65.7 μg/mL) in a phorbol 12‐myristate 13‐acetate‐activated cell model. These results support yacon tea leaves may be a good source of natural antioxidants for preventing O₂^? radical‐mediated disorders.     

Adenovirally expressed basic fibroblast growth factor rescues photoreceptor cells in RCS rats

OBJECTIVE: To examine the efficacy of an antileukocyte adhesion antibody (anti-CD18) as an adjuvant for delayed (2 hours and 4 hours) thrombolytic therapy (recombinant human tissue plasminogen activator [rt-PA]) in middle cerebral artery occlusion (MCAO) in rats. BACKGROUND: Thrombolytic therapy with rt-PA is limited in its application by a short therapeutic window. METHODS: Male Wistar rats were subjected to MCAO by a single fibrin-rich clot. The rats were assigned to the following experimental groups: Experiment 1 (treatment 2 hours after embolization), 1) rt-PA, 2) anti-CD18 antibody, 3) rt-PA and anti-CD18 antibody, 4) immunoglobulin (Ig) G, and 5) vehicle; Experiment 2 (treatment 4 hours after occlusion), 1) rt-PA alone, 2) rt-PA and anti-CD18 antibody, and 3) nontreated control group. Neurologic deficits, infarction volume, hemorrhage, and brain myeloperoxidase (MPO) immunoreactivity were measured. Results: Administration of rt-PA and anti-CD18 antibody 2 hours later reduced significantly (p < 0.05) the infarct volume and improved neurologic deficits compared with the vehicle-treated group. Treatment with rt-PA alone improved neurologic deficits significantly and reduced mean infarct volume compared with the vehicle-treated group. However, treatment with anti-CD18 antibody neither reduced infarct volume nor improved neurologic deficits compared with the IgG-treated group. The combination of rt-PA and anti-CD18 antibody treatment at 4 hours reduced significantly the infarct volume and MPO immunoreactive cells compared with rt-PA treatment alone at 4 hours, and reduced neurologic deficits compared with rt-PA treatment alone and compared with the nontreated animals. CONCLUSIONS: The combination of antileukocyte adhesion antibody and thrombolytic therapy may increase the therapeutic window for the treatment of stroke.